Flexispot Standing Desk Review …Autofocus Area Flexi Flexispot…
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this meant it was going to be tough) and likewise a little hesitant (because we all understand how much of an obstacle assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
When assembled, I like the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as close to that as I could on uplifts website with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not damaged in any way which is entirely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had actually acquired this I ‘d have been on the phone with customer care immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed as well my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a more affordable imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website too which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering numerous options and devices I could however I believe I’m better that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Autofocus Area Flexi Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na take to enter a greater end producer like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d probably be really thrilled to get this in